DIN1629 carbon steel rod - Zhongshi Steel Co., Ltd.



HOME / PRODUCTS

DIN1629 carbon steel rod

Hot Rolled Round Bars and Forged Round Bars

Carbon steel is available as bright drawn key steel in flat and square sections. With medium tensile strength key steel is used widely in general engineering for components such as plain, gib head, taper and parallel keys. Key steel is produced to the required tolerances as specified in British Standard BS46 and BS4235.Carbon spring steel specifications

EN42, CS70, CS80, CS95 and CS100 are available as hardened and tempered spring steel strip,
annealed spring steel strip, spring steel plate and spring steel sheet. EN43 spring steel is available in bar and plate. The grades commonly conform to BS970, BS1449, BS EN10083-1, BS EN10083-2, BS EN 10277 and BS EN 10278 standards.X120Mn12 1.3401 is a manganese steel with 1% carbon steel and an 11% to 14% manganese content supplied in plate. Offering excellent work hardening properties high manganese steel can be supplied in full plates or cut to your requirements.

Useful information of S45C Hot Rolled Round Bars and Forged Round Bars

S45C Hot Rolled Round Bars and Forged Round Bars are widely used in metallurgical, mechanical, electrical construction field, ships, military uses and automobile rear of products .

S45C Hot Rolled Round Bars and Forged Round Bars Chemical Composition

Grade	Chemical composition %:
Grade	C	Si	Mn	S	P	Cr	Ni	Cu
S55C	0.17-0.24	0.17-0.37	0.7-1.00	≤0.035	≤0.035	≤0.25	≤0.25	≤0.25

S45C Hot Rolled Round Bars and Forged Round Bars Physical Properties

Physical Properties	Metric	Imperial
Density	7.85 g/cm3	0.284 lb/in3

S45C Hot Rolled Round Bars and Forged Round Bars Mechanical Properties

Grade	Tensile Strength (Mpa)	Yield Strength (Mpa)	Elongation in 100-150 mm(%)	Reduction in Area	Hardness
S55C	≥380	≥210	≥25	≥50	≤111HB

Chemical Composition										Application
C	Si	Mn	P≤	S≤	CU≤	Cr	Ni	Mo	V

0.43-0.49	0.15-0.35	0.60-0.90	0.03	0.035						machine structural use,hand tools
0.53-0.59	0.17-0.37	0.50-0.80	0.03	0.03	0.2	0.25	0.3			hand tools
0.57-0.63	0.17-0.37	0.50-0.80	0.03	0.03	0.2	0.25	0.3			hand tools
0.13-0.18	0.15-0.35	0.60-0.85	0.03	0.03		0.9-1.2		0.15-0.30		shaft, piston, car & motor parts for carburizing harden
0.18-0.23	0.15-0.35	0.60-0.85	0.03	0.03		0.9-1.2		0.15-0.30
0.32-0.40	0.17-0.37	0.40-0.70	0.02	0.02	0.2	0.2	0.8-1.1		0.15-0.25	shaft, gear, tie rod and gears with high strength and large section
0.38-0.45	0.17-0.37	0.50-0.80	0.02	0.02	0.2	0.2	0.9-1.2		0.15-0.25

0.37-0.44	0.17-0.37	0.50-0.80	0.02	0.02	0.2	0.8-1.1				parts of medium speed and load
0.37-0.44	0.17-0.37	0.50-0.80	0.02	0.02	0.2	0.8-1.1			0.10-0.20	parts with variable and high load
0.38-0.43	0.17-0.30	0.70-0.80	0.02	0.02	0.2	0.5-0.6	0.25		0.10-0.20	hardware
0.51-0.59	0.15-0.35	0.70-0.90	0.035	0.04		0.7-0.9				hand tools,spring
0.42-0.47	0.15-0.35	0.60-0.90	0.03	0.03		0.5-0.7			0.10-0.15	hand tools,hook
0.47-0.54	0.17-0.37	0.50-0.80	0.02	0.02	0.2	0.8-1.1			0.10-0.20	hand tools,spring
0.56-0.64	0.15-0.35	0.75-1.00	0.035	0.04		0.4-0.6	0.4-0.7	0.15-0.25	0.15-0.25	hand tools
0.58-0.63	0.17-0.37	0.55-0.80	0.025	0.025	0.2		0.25		0.10-0.20	hand tools
0.58-0.65	0.17-0.37	0.50-0.80	0.025	0.025	0.2	0.8-1.1	0.3		0.10-0.20	hand tools
0.56-0.64	0.75-1.00	0.15-0.35	0.035	0.04		0.4-0.6	0.4-0.7	0.15-0.25	0.15-0.25	hand and air bits
0.65-0.73	1.00-1.25	0.45-0.60	0.025	0.025		0.2-0.4	0.1-0.3	0.40-0.50	0.15-0.25	hand andair bits
0.52-0.60	0.17-0.37	0.20-0.40	0.02	0.02			0.2-0.4			mechanical parts, hardware
0.18-0.23	0.15-0.35	0.70-0.90	0.035	0.04		0.4-0.6	0.4-0.7	0.15-0.25		shaft,piston,car&motor parts
0.27-0.33	≤0.10	0.70-1.10	0.03	0.03		0.3-0.5	B≥0.0005		0.10-0.15	hand tools,car&motor parts,screws
										hand tools
0.39-0.42	0.15-0.35	0.80-0.95	0.02	0.02	0.2	0.8-1.1		0.18-0.25		high strength screw and bolt
0.19-0.24	0.30	1.30-1.60	0.035	0.035			B 0.0005-0.0035		Ti 0.04-0.10	high strength screw and bolt
0.17-0.23	0.17-0.37	0.80-1.10	0.035	0.035		1.0-1.3			Ti 0.04-0.10	driving gear
0.24-0.32	0.17-0.37	0.80-1.10	0.02	0.02	0.2				Ti 0.04-0.10	locking and fixing part

SPECIFICATION - ROUND BARS

Carbon Steel Round Bars ASTM A106 API 5L X42, Carbon Steel ASTM A53 X46/X52/X60 Round Bars, Alloy Steel ASTM A335 P5/P9/P11/P12 Round Bars

Range:

3.17 MM TO 350 MM DIA

Materials:

Carbon Steel Bars – CS Bars
ASTM / ASME A 53 GR. A & B , ASTM A 106 GR. A , B & C . API 5L GR. B , API 5L .
ASTM / ASME A 691 GR. A , B & C

Alloy Steel Bars – AS Bars
ASTM / ASME A 335 GRP 1 ,
ASTM / ASME A 691 GR 1 CR , 1 1/4 CR , 2 1/4 CR , 5 CR , 9CR , 911030 Round Bars 1025 Round Bars 1025 Round Bars 1020 Steel Round Bar 1018 Carbon Steel Round Bar 1020 Carbon Steel Round Bar SAE 1035 Carbon Steel Round Bar SAE 1038 Carbon Steel Round Bar SAE 1040 Carbon Steel Round Bar SAE 1045 Carbon Steel Round Bar SAE 1215 Carbon Steel Round Bar SAE 1541 Carbon Steel Round Bar SAE 4130 Carbon Steel Round Bar SAE 4140 Carbon Steel Round Bar SAE 4150 Carbon Steel Round Bar SAE 4340 Carbon Steel Round Bar SAE 5160 Carbon Steel Round Bar SAE 8620 Carbon Steel Round Bar C22 Carbon Steel Round BarC35 Carbon Steel Round BarC40 Carbon Steel Round BarC45 Carbon Steel Round BarC50 Carbon Steel Round BarC60 Carbon Steel Round BarCK45 Carbon Steel Round BarEn8 Carbon Steel Round BarEn8A Carbon Steel Round BarEn8B Carbon Steel Round BarEn8C Carbon Steel Round BarEn8D Carbon Steel Round BarEn9 Carbon Steel Round BarEn15B Carbon Steel Round BarEn32B Carbon Steel Round BarEn42 Carbon Steel Round BarEn42B Carbon Steel Round BarEn43 Carbon Steel Round BarEn43C Carbon Steel Round BarLF-2 Carbon Steel Round BarA36 Carbon Steel Round BarA572 Carbon Steel Round BarJIS G4051 S20C Round BarGB/T 699 35# Round BarGB/T 699 30# Round BarGB/T 699 25# Round BarGB/T 699 20# Round Bar50Mn Steel Round Bars50# Steel Round Bars45Mn Round Bars45# Round Bars40Mn Round Bars40# Round BarsRound BarPeeled / Turned Round BarCold Drawn Round BarStainless Steel Round BarHigh Nickel Alloy Round BarCarbon Steel Round BarAlloy Steel Round BarMild Steel Round BarMaraging Steel Round BarAerospace Metals Specialist In Round BarHigh Speed Steel Round Bar

DIMENSIONS - ROUND BARS

Diameter or Width (mm)	Weight per meter		Sectional Area		Perimeter
Diameter or Width (mm)	Square (kg)	Round (kg)	Square (cm²)	Round (cm²)	Square (cm)	Round (cm)
5.0	0.20	0.15	0.25	0.20	2.0	1.57
5.5	0.24	0.19	0.30	0.24	2.2	1.78
6.0	0.28	0.22	0.36	0.28	2.4	1.88
7.0	0.38	0.30	0.49	0.38	2.8	2.20
8.0	0.50	0.39	0.64	0.50	3.2	2.51

9.0	0.64	0.50	0.81	0.64	3.6	2.83
10	0.73	0.63	1.00	0.79	4.0	3.14
11	0.95	0.75	1.21	0.95	4.4	3.46
12	1.13	0.89	1.44	1.13	4.8	3.77
14	1.54	1.21	1.96	1.54	5.6	4.40

16	2.01	1.58	2.56	2.01	6.4	5.03
18	2.54	2.00	3.24	2.54	7.2	5.65
20	3.14	2.47	4.00	3.14	8.0	6.28
22	3.80	2.98	4.84	3.80	8.8	6.91
25	4.91	3.85	6.25	4.91	10.0	7.85

28	6.15	4.83	7.84	6.16	11.2	8.80
32	8.04	6.31	10.24	8.04	12.8	10.05
36	10.17	7.99	12.96	10.18	14.4	11.31
40	12.56	9.86	16.00	12.57	16.0	12.57
45	15.90	12.49	20.25	15.90	18.0	14.14

50	19.62	15.41	25.00	19.64	20.0	15.71
56	24.62	19.34	31.36	24.63	22.4	17.59
63	31.16	24.47	36.69	31.17	25.2	19.79
71	39.57	31.08	50.41	39.59	28.4	22.31
80	50.24	39.46	64.00	50.27	32.0	25.13

Items	Material	Thickness (mm)	Length (mm)	Width (mm)
MS Hot Rolled Steel bar	Q235 SS330 SS400 A36M	6-25	4000-13000	1500-2500
EN10025 Hot Rolled Steel Sheet	S185 S235 S275 S355	6-30	4000-13000	1500-2500
Steel Sheet for Boiler	Q2345R Q345R	6-36	4000-13000	1500-2500
Steel Sheet for Hull	AH32 AH36 DH32 DH36	6-25	4000-13000	1600-2450
Steel Sheet for Bridge	Q235 Q345 Q370 Q420	1.2-40	4000-18000	1500-3250
Steel Sheet for Car Girder	370L 420L 440L 510L 550L	1.6-14	4000-18000	1500-3250
Steel Sheet for High-Rise Building	Q235GJ Q345GJ Q390GJ Q420GJ Q460GJ	6-60	4000-18000	1500-3250
Steel Sheet for Welding Gas Cylinder	HP235 HP265 HP295 HP325 HP345	2.5-14	4000-18000	1500-3250
Steel Sheet for Pipeline	L245 L290 L320 L360 L390 L415 L450 L485 L555	6-27	4000-18000	1600-3250
Steel Sheet for Oil Casing	J55 N80	<=21	4000-18000	1600-3250

Zhongshi Steel Co., Ltd.