PI Drill Pipes
| : | API Drill Pipes |
| Application: | Used for Mine, water well drilling, well drilling, coal and fore poling |
| Size: | OD: 2-3/8" to 7-5/8"
(t): 6.45 - 12.7mm
(L): R1(6,10-7,01), R2(8,84-9,75), R3(12,19-13,72) |
| Pipe Standard: |
|
| Upset Style: | IU ( Internal Upset )
EU ( External Upse )
IEU ( Internal&External Upset ) |
| Çelik Sınıfları: | Sour Service: C95S ve C105S , High Strength Grades: S140 ve S150 |
| Ürün Tipleri: | Standart Sondaj Borusu(SDP) ,Ağır Tip Sondaj Borusu(HWDP) |
| Connections: | NC26 - NC50, 5 1/2FH, 6 5/8FH |
| Internal coating: | TK34, TC2000, Arnco 100XT, 200XT, 300XT
|
INTRODUCTION
A drill pipe is a seamless steel pipe that composes around 95% of the length of a drill string. For clarity, a drill string is what is used to actually drill into the ground to extract resources. The drill pipe is hollow, which allows drilling fluid to flow freely throughout the pipe and the pumping process to be completed successfully.
- Drill Pipe
- 2-3/8" to 7-5/8" OD, Range 2 and 3
- Heavy Weigh
- 2-3/8" to 6-5/8" OD, Range 2 and 3
- Drill Collars
- 2-7/8" to 14"
Grades: E75, X95, G105, S135
Connection threads:NC26, NC31, NC38, NC40, NC46, NC50, 5 1/2FH.6 5/8FH.
Internal Upset: IU, EU, IEU
Heavy weight drill pipe is a medium-weight drilling pipe, (referred standards in API SPEC 7-1). It has bigger wall thickness than common drilling pipe and smaller than drill collar.
Specification
| Drill pipe diameter | Drill pipe ID | Drill pipe weight |
| 2-3/8 inch | 1.815 inch | 6.65 lb/ft |
| 2-7/8 inch | 2.151 inch | 10.40 lb/ft |
| 3-1/2 inch | 2.764 inch, 2.602 inch | 13.30 lb/ft, 15.50 lb/ft |
| 4 inch | 3.340 inch, 3.240 inch | 14.00 lb/ft, 15.70 lb/ft |
| 4-1/2 inch | 3.826 inch, 3.640 inch | 16.60 lb/ft, 20 lb/ft |
| 5 inch | 4.726 inch, 4.000 inch | 19.50 lb/ft, 25.60 lb/ft |
| 5-1/2 inch | 4.778 inch, 4.670 inch | 21.90 lb/ft, 24.70 lb/ft |
| 6-5/8 inch | 5.965 inch, 5.901 inch | 25.20 lb/ft, 27.70 lb/ft |
Standard
| Standard | API 5D |
| Grade | E-75, X-95, G-105, S-135 |
| Application: | For well drilling and borehole drilling |
| Length ranges | Range 1: 18 ft. to 22 ft.Range 2: 27 ft. to 30 ft.Range 3: 38 ft. to 45 ft. |
| Types | Drill pipeborehole drillingHeavy weight drill pipeTool jointPup joint |
Mechanical Properties API Steel Drill Pipe
| Grade | E-75 | X-95 | G-105 | S-135 |
| Yield Strength (minimum psi) | 75,000 | 95,000 | 105,000 | 135,000 |
| Yield Strength (maximum psi) | 105,000 | 125,000 | 135,000 | 165,000 |
| Tensile Strength (minimum psi) | 100,000 | 105,000 | 115,000 | 145,000 |
Chemical composition requirements
| Chemical composition requirements |
| Pipe body | Phosphorusmax. % | Sulfurmax. % |
| Pipe body grade E | 0.030 | 0.020 |
| Pipe body grades X, G and S | 0.020 | 0.015 |
| Tool joint | 0.020 | 0.015 |
Our factory
Packing
· 1- Plastic caps plugged at the two sides of pipe ends
· 2- Should be avoided by the steel strapping and transport damage
· 3- Bundled signs should be uniform and consistent
· 4- The same bundle(batch) of steel pipe should be came from the same furnace.
· 5- The steel pipe has the same furnace number, the same steel grade, the same specifications.